Rear final drive (01R)
published Taken from published technical material.
- Part ID
- part-a8-drivetrain-rear-differential
- Twin part ID
- a8d2.drivetrain.rear_differential
- Subsystem
- Drivetrain (quattro)
- Part of
- quattro driveline (propshaft, rear differential)
- Model
- Twin 0.3.0
Notes
Rear differential: one rubber mount in a differential support at the front, two mounts in an aluminium differential cross member at the rear, both on the subframe (SSP 161 p.31). Housing with the pinion, a side cover carrying the large taper bearing and one drive flange, two drive flanges each held by one M8 socket bolt (24 Nm), filler plug in the cover and drain plug in the housing (35 Nm), breather on top and a ring magnet (workshop manual). Gear oil 0.5 l (ETKA); level to the lower edge of the filler hole.
Notes come from the twin and are not verified facts. "[owner photo]" marks a reference to a private photograph.
Contains
- Breather valve published
- Final drive side cover (right) published
- Differential cross member (aluminium) photo
- Oil drain plug M22 (35 Nm) published
- Oil filler plug M22 (in the cover, 35 Nm) published
- Drive flange — left published
- Drive flange — right published
- Final drive housing (with pinion) published
- Differential mount (front) catalogue
- Differential mount (rear, in the cross member) generic
- Differential mount (rear, in the cross member) generic
- Pinion (drive shaft) flange catalogue
- Differential support (front) catalogue
and 12 fasteners, listed on the subsystem page.
Machine-readable
api.spacecorp.io/v1/parts/part-a8-drivetrain-rear-differential