Drive shaft — front left
published Taken from published technical material.
- Part ID
- part-a8-drivetrain-front-left-driveshaft
- Twin part ID
- a8d2.drivetrain.front_left_driveshaft
- Subsystem
- Drivetrain (quattro)
- Part of
- Corner module — front left
- Model
- Twin 0.3.0
Notes
Drive axle with a tripod inner joint on a flange and an outer CV joint 98 mm across; the left and right shafts differ in length. Flange bolts M10 77 Nm; hub bolt M16, renew, 200 Nm + 90 deg. Inner tripod joint 140 g grease; outer joint 120 g (80 g in the joint, 40 g in the boot). Clamps are renewed; the outer boot is vented after fitting (workshop manual).
Notes come from the twin and are not verified facts. "[owner photo]" marks a reference to a private photograph.
Contains
- Inner joint boot (tripod joint) published
- Outer CV boot published
- Inner tripod joint (flange) published
- Outer CV joint (98 mm) published
- Drive axle (left and right differ in length) published
and 10 fasteners, listed on the subsystem page.
Machine-readable
api.spacecorp.io/v1/parts/part-a8-drivetrain-front-left-driveshaft