Air intake (as found)
photo Shape or placement matched against calibrated photographs.
- Part ID
- part-a8-intake
- Twin part ID
- a8d2.intake
- Subsystem
- Air intake
- Part of
- 4.2 V8 engine (ABZ)
- Model
- Twin 0.3.0
Notes
Factory airbox absent; aftermarket black silicone duct with foil heat-wrap to a red cone filter (photographed). Two-stage variable intake: short path opens above 4000 rpm (published).
Notes come from the twin and are not verified facts. "[owner photo]" marks a reference to a private photograph.
Contains
- Intake plenum (bare cast, as photographed) photo
- Idle air control valve N71 published
- Air control valve for injectors N212 published
- Intake manifold change-over valve N156 published
- Air-mass meter (hot film) published
- Throttle position sensor generic
- Cone air filter (red, aftermarket) photo
- Cone-filter base (red anodised, aftermarket) photo
- Rubber bellows (MAF to filter) photo
- Foil heat-wrap on duct photo
- Silicone intake duct (aftermarket) photo
- Intake runner — cyl 1 photo
- Intake runner — cyl 2 photo
- Intake runner — cyl 3 photo
- Intake runner — cyl 4 photo
- Intake runner — cyl 5 photo
- Intake runner — cyl 6 photo
- Intake runner — cyl 7 photo
- Intake runner — cyl 8 photo
- Corrugated rubber bellows (throttle end) photo
- Throttle body (rear right of the plenum) photo
and 18 fasteners, listed on the subsystem page.